[Current situation and development trend of digital traditional Chinese medicine pharmacy].

The 21st century is a highly information-driven era, and traditional Chinese medicine(TCM) pharmacy is also moving towards digitization and informatization. New technologies such as artificial intelligence and big data with information technology as the core are being integrated into various aspects of drug research, manufacturing, evaluation, and application, promoting interaction between these stages and improving the quality and efficiency of TCM preparations. This, in turn, provides better healthcare services to the general population. The deep integration of emerging technologies such as artificial intelligence, big data, and cloud computing with the TCM pharmaceutical industry will innovate TCM pharmaceutical technology, accelerate the research and industrialization process of TCM pharmacy, provide cutting-edge technological support to the global scientific community, boost the efficiency of the TCM industry, and promote economic and social development. Drawing from recent developments in TCM pharmacy in China, this paper discussed the current research status and future trends in digital TCM pharmacy, aiming to provide a reference for future research in this field.

Identification of a novel MICB allele, MICB*014:02, by cloning and sequencing.

The novel MICB*014:02 allele differs from MICB*014:01:01 by one nucleotide change in exon 2.

[Pharmacokinetics, pharmacodynamics, and tissue distribution of oral co-loaded puerarin/daidzein mixed micelles in rats].

This study investigated the drug delivery performance of oral co-loaded puerarin(PUE) and daidzein(DAZ) mixed micelles(PUE/DAZ-FS/PMMs) from the perspectives of pharmacokinetics, pharmacodynamics, and tissue distribution. The changes in PUE plasma concentration in rats were evaluated based on PUE suspension, single drug-loaded micelles(PUE-FS/PMMs), and co-loaded micelles(PUE/DAZ-FS/PMMs). Spontaneously hypertensive rats(SHR) were used to monitor systolic blood pressure, diastolic blood pressure, and mean arterial pressure for 10 weeks after administration by tail volume manometry. The content of PUE in the heart, liver, spleen, lung, kidney, brain, and testes was determined using LC-MS/MS. The results showed that compared with PUE suspension and PUE-FS/PMMs, PUE/DAZ-FS/PMMs significantly increased C_(max) in rats(P<0.01) and had a relative bioavailability of 122%. The C_(max), AUC_(0-t), AUC_(0-∞), t_(1/2), and MRT of PUE/DAZ-FS/PMMs were 1.77, 1.22, 1.22, 1.17, and 1.13 times higher than those of PUE suspension, and 1.76, 1.16, 1.08, 0.84, and 0.78 times higher than those of PUE-FS/PMMs, respectively. Compared with the model control group, PUE/DAZ-FS/PMMs significantly reduced systolic blood pressure, diastolic blood pressure, and mean arterial pressure in SHR rats(P<0.05). The antihypertensive effect of PUE/DAZ-FS/PMMs was greater than that of PUE suspension, and even greater than that of PUE-FS/PMMs at high doses. Additionally, the distribution of PMMs in various tissues showed dose dependency. The distribution of PMMs in the kidney and liver, which are metabolically related tissues, was lower than that in the suspension group, while the distribution in the brain was higher than that in the conventional dose group. In conclusion, PUE/DAZ-FS/PMMs not only improved the bioavailability of PUE and synergistically enhanced its therapeutic effect but also prolonged the elimination of the drug to some extent. Furthermore, the micelles facilitated drug penetration through the blood-brain barrier. This study provides a foundation for the development of co-loaded mixed micelles containing homologous components.

[Current status, trends, and challenges of continuous manufacturing technology for oral traditional Chinese medicine solid preparations].

In recent years, continuous manufacturing technology has attracted considerable attention in the pharmaceutical industry. This technology is highly sought after for its significant advantages in cost reduction, increased efficiency, and improved productivity, making it a growing trend in the future of the pharmaceutical industry. Compared to traditional batch production methods, continuous manufacturing technology features real-time control and environmentally friendly intelligence, enabling pharmaceutical companies to produce drugs more efficiently. However, the adoption of continuous manufacturing technology has been slow in the field of traditional Chinese medicine(TCM) pharmaceuticals. On the one hand, there is insufficient research on continuous manufacturing equipment and technology that align with the characteristics of TCM preparations. On the other hand, the scarcity of talent with diverse expertise hampers its development. Therefore, in order to promote the modernization and upgrading of the TCM pharmaceutical industry, this article combined the current development status of the TCM industry to outline the development status and regulatory requirements of continuous manufacturing technology. At the same time, it analyzed the problems with existing TCM manufacturing models and explored the prospects and challenges of applying continuous manufacturing technology in the field of TCM pharmaceuticals. The analysis focused on continuous manufacturing control strategies, technical tools, and pharmaceutical equipment, aiming to provide targeted recommendations to drive the development of the TCM pharmaceutical industry.

[Research progress in gut-skin axis and its association with traditional Chinese medicine theory].

Currently, the gut-organ axis has become a hot research topic. As increasing attention has been paid to the role of gut microbiota in the health of organs, the complex and integrated dialogue mechanism between the gastrointestinal tract and the associated microbiota has been demonstrated in more and more studies. Skin as the largest organ in the human body serves as the primary barrier protecting the human body from damage. The proposal of the gut-skin axis has established a bidirectional link between the gut and the skin. The disturbance of gut microbiota can lead to the occurrence of skin diseases, the mechanism of which is complex and may involve multiple pathways in immunity, metabolism, and internal secretion. According to the theory of traditional Chinese medicine(TCM), the connection between the intestine and the skin can be established through the lung, and the interior disorders will definitely cause symptoms on the exterior. This paper reviews the research progress in the gut-skin axis and its correlation with TCM theory and provides ideas and a basis for cli-nical treatment and drug development of skin and intestinal diseases.

Response characteristics of MAPbBr3 direct conversion X-ray detectors based on measurements and Monte Carlo simulation.

In recent years, higher requirements have been placed on the response characteristics of X-ray detectors in the field of medical diagnostic imaging. Due to this, high sensitivity, high attenuation coefficient and low cost detection materials need to be developed. In this paper, the geometric model of a detector was established by Geant4 code. The absorption efficiency and mass attenuation coefficient of MAPbBr3 crystals were calculated in the energy range of 30 keV to 100 keV. Compared with the mass attenuation coefficient of the NIST database, the deviation was within 1.39%. The signal charge number and detection sensitivity of the X-ray interaction with the MAPbBr3 crystal ware calculated. Compared with the CdTe crystal and α-Se, the MAPbBr3 crystal still had a larger detection sensitivity under a smaller applied electric field, which was approximately 9 times higher than that of α-Se. This result indicated that the detection sensitivity could be greatly improved by using a high atomic number and high charge mobility-lifetime product. Based on the simulation results, the 2 mm thick MAPbBr3 crystal exhibited the highest detection sensitivity at 60 keV X-rays, which was in agreement with the experimental results.

[Preparation and in vitro property evaluation of ß-cyclodextrin-daidzein/PEG_(20000)/Carbomer_(940) nanocrystals].

This study aims to improve the solubility and bioavailability of daidzein by preparing the ß-cyclodextrin-daidzein/PEG_(20000)/Carbomer_(940) nanocrystals. Specifically, the nanocrystals were prepared with daidzein as a model drug, PEG_(20000), Carbomer_(940), and NaOH as a plasticizer, a gelling agent, and a crosslinking agent, respectively. A two-step method was employed to prepare the ß-cyclodextrin-daidzein/PEG_(20000)/Carbomer_(940) nanocystals. First, the insoluble drug daidzein was embedded in ß-cyclodextrin to form inclusion complexes, which were then encapsulated in the PEG_(20000)/Carbomer_(940) nanocrystals. The optimal mass fraction of NaOH was determined as 0.8% by the drug release rate, redispersability, SEM morphology, encapsulation rate, and drug loading. The inclusion status of daidzein nanocrystals was determined by Fourier transform infrared spectroscopy(FTIR), thermogravimetric analysis(TGA), and X-ray diffraction(XRD) analysis to verify the feasibility of the preparation. The prepared nanocrystals showed the average Zeta potential of(-30.77±0.15)mV and(-37.47±0.64)mV and the particle sizes of(333.60±3.81)nm and(544.60±7.66)nm before and after daidzein loading, respectively. The irregular distribution of nanocrystals before and after daidzein loading was observed under SEM. The redispersability experiment showed high dispersion efficiency of the nanocrystals. The in vitro dissolution rate of nanocrystals in intestinal fluid was significantly faster than that of daidzein, and followed the first-order drug release kinetic model. XRD, FTIR, and TGA were employed to determine the polycrystalline properties, drug loading, and thermal stability of the nanocrystals before and after drug loading. The nanocrystals loaded with daidzein demonstrated obvious antibacterial effect. The nanocrystals had more significant inhibitory effects on Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa than daidzein because of the improved solubility of daidzein. The prepared nanocrystals can significantly increase the dissolution rate and oral bioavailability of the insoluble drug daidzein.

[Modern research progress in external application of traditional Chinese medicine to acupoints].

Traditional Chinese medicine(TCM) has a long history and abundant experience in external therapy, which marks human wisdom. In the early history of human, people found that fumigation, coating, and sticking of some tree branches and herb stems can help alleviate scabies and remove parasites in productive labor, which indicates the emergence of external therapy. Pathogen usually enters the body through the surface, so external therapy can be used to treat the disease. External therapy is among the major characteristic of surgery of TCM. As one of the external therapies in TCM, external application to acupoints smooths the zang-fu organs through meridians and collaterals, thereby harmonizing yin and yang. This therapy emerged in the early society, formed the Spring and Autumn Period and the Warring States Period, improved in the Song and Ming dynasties, and matured in the Qing dynasty. With the efforts of experts in history, it has had a mature theory. According to modern research, it can avoid the first-pass effect of liver and the gastrointestinal irritation and improve the bioavailability of Chinese medicine. Based on the effect of Chinese medicine and the theory of meridian and collateral, it can stimulate the acupoints, exert regulatory effect on acupoints, and give full play to the efficacy of TCM and the interaction of the two. Thereby, it can regulate qi and blood and balance yin and yang, thus being widely used in the treatment of diseases. In this paper, the use of external application to acupoints, the effect on skin immunity, the regulation of neuro-inflammatory mechanism, the relationship between acupoint application and human circulation network, and the development of its dosage form were summarized through literature review. On this basis, this study is expected to lay a foundation for further research.

[Mechanism of active components of "Notoginseng Radix et Rhizoma-Drynariae Rhizoma" in treatment of osteoporosis based on network pharmacology and in vitro cell experiment].

The present study aimed to explore the main active components and potential mechanisms of Panax notoginseng saponins(PNS) and osteopractic total flavone(OTF) in the treatment of osteoporosis(OP) through network pharmacology, molecular docking and in vitro cell experiments, which was expected to provide a theoretical basis for clinical applications. The blood-entering components of PNS and OTF were obtained from literature search and online database, and their potential targets were obtained from Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform(TCMSP) and SwissTargetPrediction. The OP targets were obtained by means of searching Online Mendelian Inheritance in Man(OMIM) and GeneCards. The common targets of the drug and disease were screened by Venn. Cytoscape was used to construct a "drug-component-target-disease" network, and the core components were screened according to the node degree. The protein-protein interaction(PPI) network of the common targets was constructed by STRING and Cytoscape, and the core targets were screened according to the node degree. GO and KEGG enrichment analysis of potential therapeutic targets were carried out by R language. Molecular docking was used to determine the binding activity of some active components to key targets by AutoDock Vina. Finally, HIF-1 signaling pathway was selected for in vitro experimental verification according to the results of KEGG pathway analysis. Network pharmacology showed that there were 45 active components such as leachianone A, kurarinone, 20(R)-protopanaxatriol, 20(S)-protopanaxatriol, and kaempferol, and 103 therapeutic targets such as IL6, AKT1, TNF, VEGFA and MAPK3 involved. PI3K-AKT, HIF-1, TNF and other signaling pathways were enriched. Molecular docking revealed that the core components had good binding ability to the core targets. In vitro experiments found that PNS-OTF could up-regulate the mRNA expression levels of HIF-1α, VEGFA and Runx2, indicating that the mechanism of PNS-OTF in treating OP may be related to the activation of HIF-1 signaling pathway, and thus PNS-OTF played a role in promoting angiogenesis and osteogenic differentiation. In conclusion, this study predicted the core targets and pathways of PNS-OTF in treating OP based on network pharmacology and carried out in vitro experimental verification, which reflected the characteristics of multi-component, multi-target and multi-pathway synergy of PNS-OTF, and provided new ideas for the future clinical treatment of OP.

The preparation, characterization, and application of porous core-shell composite particles produced with laboratory-scale spray dryer.

OBJECTIVE: To prepare porous core-shell composite particles (PCPs) in order to improve the flowability and compactibility of powder materials for direct compaction (DC), as well as the dissolution of tablets. SIGNIFICANCE: The results obtained are meaningful to boosting the development and further research of PCPs on DC. Methods: In this study, hydroxypropyl methylcellulose (HPMC E3) and polyvinylpyrrolidone (PVP K30) were selected as shell materials, the Xiao Er Xi Shi formulation powder (XEXS) was used as the core materials, ammonium bicarbonate (NH4HCO3), and sodium bicarbonate (NaHCO3) were employed as pore-forming agent. Using co-spray drying method to prepare composite particles (CPs). Then, the physical properties and comparison between different CPs were characterized comprehensively. Finally, the different CPs were directly compacted as tablets to explore the effect on the dissolution behavior of DC tablets, respectively. RESULTS: (i) The XEXS PCPs were prepared successfully by co-spray drying, and the yield of PCPs is almost 80%; (ii) The TS values of PCP-X-P-Na, PCP-X-P-NH4, PCP-X-H-Na and PCP-X-P-Na were 5.70, 7.56, 3.98, and 6.88 times higher than that of raw material (X); (iii) The disintegration time of PCPs tablets decreased 10-25% when compared with CPs tablets; (iv) The values of Carr's index (CI), Hausner ratio (HR), Caking strength (CS), and Cohesion index (CoI) of PCP-X-H-NH4 were 19.16%, 19.29%, 40.14%, and 6.39% lower than that of X, respectively. CONCLUSIONS: The PCPs prepared by co-spray drying did improve the flowability and compactibility of powder, as well as the dissolution of tablets.

Advances in numerical simulation of unit operations for tablet preparation.

Recently, there has been an increase in the use of numerical simulation technology in pharmaceutical preparation processes. Numerical simulation can contribute to a better understanding of processes, reduce experimental costs, optimize preparation processes, and improve product quality. The intermediate material of most dosage forms is powder or granules, especially in the case of solid preparations. The macroscopic behavior of particle materials is controlled by the interactions of individual particles with each other and surrounding fluids. Therefore, it is very important to analyze and control the microscopic details of the preparation process for solid preparations. Since tablets are one of the most widely used oral solid preparations, and the preparation process is relatively complex and involves numerous units of operation, it is especially important to analyze and control the tablet production process. The present paper discusses recent advances in numerical simulation technology for the preparation of tablets, including drying, mixing, granulation, tableting, and coating. It covers computational fluid dynamics (CFD), discrete element method (DEM), population balance model (PBM), finite element method (FEM), Lattice-Boltzmann model (LBM), and Monte Carlo model (MC). The application and deficiencies of these models in tablet preparation unit operations are discussed. Furthermore, the paper provides a systematic reference for the control and analysis of the tablet preparation process and provides insight into the future direction of numerical simulation technology in the pharmaceutical industry.

JAK/STAT3 Signaling Activation Related to Distinct Clinicopathologic Features in Systemic ALK - Anaplastic Large Cell Lymphomas : New Insights into Their Heterogeneity.

Systemic anaplastic lymphoma kinase (ALK)-negative anaplastic large cell lymphoma (ALCL) is a group of heterogenous CD30 + T-cell non-Hodgkin lymphomas. Previous studies have highlighted the importance of JAK/STAT3 signaling activation in the molecular pathogenesis of ALK - ALCLs. In the present study, we aimed to establish a potential relationship between JAK/STAT3 signaling activation and clinicopathologic features in ALK - ALCLs, and further recognize the heterogenous nature of these neoplasms. Immunohistochemistry staining of the phosphorylated-STAT3 (p-STAT3) and dual-specificity protein phosphatase 22 ( DUSP22 ) gene rearrangement analysis were performed. Forty-five cases of ALK - ALCL were divided into 3 groups, including 9 DUSP22 -rearranged ALCLs, 21 p-STAT3 + double-negative (DN) ALCLs (both ALK and DUSP22 rearrangement negative), and 15 p-STAT3 - DN-ALCLs. Morphologically, p-STAT3 + DN-ALCLs exhibited sheet-like neoplastic cells and sometimes showed large pleomorphic cells scattered in a lymphocyte-rich background more frequently than those in other ALK - ALCLs subtypes. Phenotypically, the p-STAT3 + DN-ALCLs frequently expressed cytotoxic molecules, epithelial membrane antigen, and programmed death-ligand 1, whereas CD3 and CD5 expression was not observed. Clinically, patients with p-STAT3 + DN-ALCLs had a better prognosis than those with p-STAT3 - DN-ALCLs. These observations suggest that p-STAT3 + DN-ALCLs represent a distinct subtype of ALK - ALCLs. Identifying ALK - ALCL subtypes by using p-STAT3 staining and DUSP22 rearrangement is a promising approach that may contribute to risk stratification and better treatment decisions in the future clinical practice.

[Intrinsic "self-consistent" phenomenon based on holistic view of traditional Chinese medicine].

The fundamental principle of traditional Chinese medicine(TCM) is holism, and it is crucial for TCM to address the key issue of the "holistic view" of Chinese herbal medicine. While the overall regulatory effects of Chinese herbal medicine have been widely recognized, the holistic internal logic of individual ingredients of Chinese herbal medicines require further clarification. In order to comprehensively understand the mechanism of action of Chinese herbal medicine, this paper combined the holistic view of Chinese herbal medicine with differentiation thinking to explore the intrinsic logical relationships within Chinese herbal medicine. Starting from the perspective of the coexistence of multiple components in Chinese herbal medicine, this paper systematically examined the "self-consistent" phenomenon within single Chinese herbal medicine. This phenomenon refers to the consistent or opposing actions of various components in terms of their physical and chemical properties, pharmacokinetic effects, biological effects, flavors and properties, and TCM efficacy. The paper summarized various logical relationships of syndrome differentiation exhibited by the same Chinese herbal medicine, analyzed the underlying reasons, and focused on analyzing external factors affecting the "self-consistent" phenomenon in the efficacy of Chinese herbal medicine, aiming to better elucidate the theoretical basis of the pharmacological effects of Chinese herbal medicine, further enrich the scientific connotation of the holistic view of Chinese herbal medicine, and provide theoretical guidance for the preparation process, compatibility patterns, and formulation design of Chinese herbal medicine.

Surface Modifiers on Composite Particles for Direct Compaction.

Direct compaction (DC) is considered to be the most effective method of tablet production. However, only a small number of the active pharmaceutical ingredients (APIs) can be successfully manufactured into tablets using DC since most APIs lack adequate functional properties to meet DC requirements. The use of suitable modifiers and appropriate co-processing technologies can provide a promising approach for the preparation of composite particles with high functional properties. The purpose of this review is to provide an overview and classification of different modifiers and their multiple combinations that may improve API tableting properties or prepare composite excipients with appropriate co-processed technology, as well as discuss the corresponding modification mechanism. Moreover, it provides solutions for selecting appropriate modifiers and co-processing technologies to prepare composite particles with improved properties.

[Effect of Gegen Qinlian Decoction on methylation and expression of Scd1gene in adipose tissue of insulin resistant rats and correlations between methylation and physiological and biochemical parameters].

This study aimed to explore the effect of Gegen Qinlian Decoction(GQD) on the methylation and mRNA expression level of stearoyl CoA desaturase(SCD) gene in the adipose tissue of rats with insulin resistance(IR) induced by high-fat diet as well as the correlations between methylation and physiological and biochemical indicators. The animals were divided into seven groups, namely, blank control(C) group, IR model group, low-(1.65 g·kg~(-1)), medium-(4.95 g·kg~(-1)), and high(14.85 g·kg~(-1))-dose GQD(GQDL, GQDM, and GQDH) groups, rosiglitazone(RGN, 5 mg·kg~(-1)) group, and simvastatin(SVT, 10 mg·kg~(-1)) group. The rat epididymal adipose tissue was collected for detecting all the cytosine methylation levels in two fragments of Scd1 gene by bisulfite sequencing PCR(BSP). Scd1-1 was located in CG shores and Scd1-2 in CG islands, including the transcriptional start site(TSS). The Scd1 mRNA level was determined by quantitative real-time PCR(q-PCR). Spearman correlation coefficient was used to analyze the correlations between amplified fragment C methylation and physiological and biochemical indicators. The results showed that GQDM remarkably reversed the elevated CG7 methylation in the TSS upstream region of Scd1-2 triggered by high-fat diet. GQDL significantly reversed the lowered total CG methylation in the downstream region of Scd1-2 induced by the high-fat diet. GQD did not significantly improve the decreased Scd1 mRNA expression caused by high-fat diet. Changes in methylation of the total CG, CG5 and CT11 of Scd1-1 in CG shores exhibited significant negative correlations with the serum triglyceride(TG) but positive correlation with the Scd1 mRNA level. The methylation of several C sites in the TSS upstream region of Scd1-2 was positively correlated with physiological and biochemical parameters. The methylation of several CG sites in the TSS downstream region of Scd1-2 was negatively associated with physiological and biochemical parameters. Besides, the methylation of several CH sites in the downstream fragment was positively correlated with physiological and biochemical parameters. All these have demonstrated that GQD may exert the therapeutic effect by regulating the methylation of CG7 in the TSS upstream region and total CG site in the TSS downstream region of Scd1 gene. The methylation of total CG, CG5 and CT11 sites in CG shores of Scd1 gene may be important targets for regulating Scd1 mRNA level and affecting serum TG.

[Technical recommendations for pragmatic randomized controlled trials of heat-sensitive moxibustion in community (â ¡): organization, implementation and follow-up visits].

Based on the community research experience of heat-sensitive moxibustion, this study explained technical recommendations for pragmatic randomized controlled trials (pRCTs) of heat-sensitive moxibustion in community from 7 aspects: selection of community research sites, ethical approval and registration, patient recruitment, training of standard operating procedures, ensuring patient compliance, quality control of follow-up visits and patient safety, which aimed to reduce the difficulty of research execution and improve the quality of pRCTs implementation and follow-up visits of heat-sensitive moxibustion.

[Quality value transfer of material benchmark of Guizhi Jia Gegen Decoction].

A total of 15 batches of the substance reference of Guizhi Jia Gegen Decoction(GZGGD) were prepared and the characteristic fingerprints of them were established. Furthermore, the similarity of the fingerprints and peak attributes were explored. The extraction rate, and the content and the transfer rate ranges of the index components, puerarin, paeoniflorin, liquiritin, and ammonium glycyrrhizate were determined for the analysis of the quality value transfer. The result demonstrated that the fingerprints of the 15 batches of the samples showed high similarity(>0.99). A total of 15 characteristic peaks were identified from the fingerprints, with 10 for Puerariae Lobatae Radix, 1 for Cinnamomi Ramulus, 2 for Paeoniae Radix Alba, and 2 for Glycyrrhizae Radix et Rhizoma. The content of puerarin was 11.05-18.35 mg·g~(-1) and the average transfer rate was 21.27%-39.49%. The corresponding figures were 7.95-10.90 mg·g~(-1) and 23.28%-43.23% for paeoniflorin, 3.25-4.95 mg·g~(-1) and 32.31%-61.27% for ammonium glycyrrhizate, and 3.65-5.80 mg·g~(-1) and 14.57%-27.05% for liquiritin. The extraction rate of the 15 batches of samples was in the range of 16.85%-21.78%. In this paper, the quality value transfer of the substance reference of GZGGD was analyzed based on characteristic fingerprint, content of index components, and the extraction rate. This study is expected to lay a basis for the quality control and further development of GZGGD.

[Pharmacokinetic behavior and brain tissue distribution of paeoniflorin combined with normal and toxic doses of strychnine in rats after percutaneous administration].

This study aims to establish a rapid and sensitive UPLC-MS/MS method for simultaneously determining the content of strychnine and paeoniflorin in plasma and brain tissue of rats, and compare the pharmacokinetic behavior and brain tissue distribution of paeoniflorin combined with normal and toxic doses of strychnine in rats after percutaneous administration. Compared with those in the toxic-dose strychnine group, the AUC_(0-t), AUC_(0-∞), and C_(max) of strychnine decreased by 51.51%, 45.68%, and 46.03%, respectively(P<0.01), and the corresponding values of paeoniflorin increased by 91.41%, 102.31%, and 169.32%, respectively(P<0.01), in the compatibility group. Compared with the normal-dose strychnine group, the compatibility group showed insignificantly decreased C_(max), AUC_(0-t), and AUC_(0-∞) of strychnine, increased C_(max) and T_(max) of paeoniflorin(P<0.01), 66.88% increase in AUC_(0-t), and 70.55% increase in AUC_(0-∞) of paeoniflorin. In addition, the brain tissue concentration of strychnine decreased and that of paeoniflorin increased after compatibility. The combination of paeoniflorin with normal dose and toxic dose of strychnine can inhibit the percutaneous absorption of strychnine, and greatly promote the percutaneous penetration of paeoniflorin, whereas the interaction mechanism remains to be explored. The UPLC-MS/MS method established in this study is easy to operate and has good precision. It is suitable for in vivo study of pharmacokinetic behavior and brain tissue distribution of paeoniflorin and strychnine after percutaneous administration in rats, which provides reference for the safe and rational clinical use of strychnine and the combined use of drugs, and lays a solid foundation for the development of external preparations containing Strychni Semen.

[Preparation and intestinal absorption of Panax notoginseng saponins chitosan nanoparticles].

In this experiment, Panax notoginseng saponins chitosan nanoparticles(PNS-NPs) were prepared by self-assembly and their appearance, particle size, encapsulation efficiency, drug loading, polydispersity index(PDI), Zeta potential, and microstructure were characterized. The prepared PNS-NPs were intact in structure, with an average particle size of(209±0.258) nm, encapsulation efficiency of 42.34%±0.28%, a drug loading of 37.63%±0.85%, and a Zeta potential of(39.8±3.122) mV. The intestinal absorption of PNS-NPs in rats was further studied. The established HPLC method of PNS was employed to investigate the effects of pH, perfusion rate, and different drugs(PNS raw materials, Xuesaitong Capsules, and PNS-NPs). The absorption rate constant(K_a) and apparent permeability coefficient(P_(app)) in the duodenum, jejunum, ileum, and colon were calculated and analyzed. As illustrated by the results, the intestinal absorption of PNS-NPs was increased in the perfusion solution at pH 6.8(P<0.05), and perfusion rate had no significant effect on the K_a and P_(app) of PNS-NPs. The intestinal absorption of PNS-NPs was significantly different from that of PNS raw materials and Xuesaitong Capsules(P<0.05), and the intestinal absorption of PNS-NPs was significantly improved.

[Quality control mode based on engineering quality view of Chinese medicine pharmacy].

Due to the characteristics of confusing varieties of Chinese medicinal materials, different sources, complex chemical composition, non-standard preparation process, and non-standard pharmaceutical equipment, the quality of Chinese medicinal preparations is difficult to be controlled and evaluated effectively under the current quality control mode and method of Chinese medicinal preparation. The present study proposed an engineering quality view of Chinese medicine pharmacy and a strategy to control the quality of Chinese medicinal preparations based on the current situation. The "overall, dialectical, and dynamic" multi-factor engineering quality view, covering original medicinal materials, preparation technologies, pharmaceutical equipment, and Chinese medicinal preparations, ensures the traceable process, measurable procedures, and feedback quality. The quality control mode of Chinese medicinal preparation with controllable sources, standardized preparation technologies, green pharmaceutical equipment, and intelligent manufacturing is built up.